Dual Ethernet Base Board for Raspbery Pi CM5, Supports 4G / 5G Module, Dual 4K Display Outputs and Dual MIPI Interfaces, PoE Module Support, Base Board + Metal Case + Power Supply

Product Overview The CM5-DUAL-ETH-4G/5G-BASE is an I/O board for the Raspbery Pi Compute Module 5. It features powerful features like dual USB 3.2 Gen1 ports, an M.2 M Key, an M.2 B Key (4G/5G module interface), and dual Ethernet ports for convenient use. Features and precautions ● Do not plug or unplug any devices other than USB and HDMI while the device is powered. ● The Type-C port can be used as a USB slave port for burning images or powering devices. ● Onboard dual USB 3.2 Gen1 ports. ● Supports up to four monitors with a MIPI DSI driver. Regardless of whether a monitor is connected, the system will default to connected, and the screens will display in split-screen mode (depending on the system version). ● The onboard M.2 M KEY port supports NVMe hard drives (or PCIe AI modules). The onboard M.2 B KEY port supports 4G/5G communication modules. ● The onboard BOOT switch can be turned on before powering on the device. Connecting the device to a computer via Type-C will put the device into burning mode. ● Do not connect other devices when using Type-C to burn, as this will result in insufficient power and device recognition. ● The USB 3.0 port has a maximum power output of 2A. Package Content 1. CM5-DUAL-ETH-4G/5G-BASE x1 2. Mental case (top and bottom boxes) 3. CM5-FAN-4010-5V x1 4. 12V 4A power adapter x1 5. Rubber plug 4PCS x1 6. Screws pack x1

• Do not plug or unplug any devices other than USB and HDMI while powered.
• Type-C can be used as a USB slave port for burning images or powering the device.
• Onboard dual USB 3.2 Gen1 ports.
• Supports four monitors with a MIPI DSI driver. Regardless of whether a monitor is connected, the system will default to being connected, and the screens will display in split-screen mode (depending on the system version).
• Onboard M.2 M KEY port supports NVMe hard drives (or PCIe AI modules). Onboard M.2 B KEY port supports 4G/5G communication modules.
• Onboard BOOT switch: Flip the BOOT switch to ON before powering on the device. Connect the device to a computer via Type-C to enter burning mode.
• Do not connect other devices when burning via Type-C; otherwise, insufficient power will result and the device will not be recognized.
• The USB 3.0 ports have a maximum power output of 2A.